Drager Fabius GS



Drager Fabius GS combines advanced ventilation technology with reliable and proven breathing system components, opening new frontiers in ventilation performance while maintaining well-established functionality.

Final price will be confirmed in quote

View cart above to complete quote request.


The Fabius GS Anesthesia Machine is a high-functioning, user-friendly, anesthesia workstation. The
ergonomic design facilitates efficient use and contributes to a positive, productive anesthesia
workplace. Its modular concept allows you to configure precisely the workstation you require.

  • High-Performance Ventilation: Powerful and accurate, low-flow, E-vent piston ventilator delivers
    ICU-like ventilation performance, so there is no need for drive gas
  • All major ventilation modes – volume control, pressure control, pressure support (PS), and
    SIMV/PS – can be supported
  • Electronic Gas-Flow Measurement: Electronic vertical flow controls and electronic fresh gas flow
  • Compact Breathing System: Ergonomic design allows for optimal positioning of the semi-closed
    breathing system (COSY). The system can be height-adjusted, pre-assembled on the left or right
    side of the machine, or easily removed for cleaning and sterilization
  • Intelligent Cable Management: MultiMed parameter module reduces cable clutter and simplifies
    patient transfer
  • Integrated LED workplace illumination
  • Solid, spacious design with large drawers
  • Industry-standard rails for additional Drager and third-party equipment.


  • Height: 51.2 inches (130 cm)
  • Width: 35.2 inches (89.5 cm)
  • Depth: 32.3 inches (82 cm)
  • Weight (base unit without vaporizers or cylinders): 224 lbs (101.6 kg)
  • Power Supply: 100-240 VAC, 50/60 Hz, 2.3 A max.
  • Battery (supports ventilator and monitor): > 45 min
  • Ventilator E-vent: Electronically controlled, electrically driven
  • Breathing Frequency: 4 to 60 bpm
  • Max. Minute Volume (MV): 25 L/min
  • Positive End-Expiratory Pressure (PEEP): 0-20 cmH2O
  • Inspiration/Expiration Ratio (Ti:Te): 4:1 to 1:4
  • Pressure Limiting (Pmax): 15-70 cmH2O
  • Tidal Volume (Vt): 20-1400 mL in Volume Control; 20-1100 mL in SIMV/PS
  • Inspiratory pause (Tip:Ti): 0-50%
  • SIMV Inspiratory Time (Tinsp): 0.3-4.0 sec
  • Inspiratory Pressure (Pinsp): PEEP + 5 to 65 cmH2O
  • Inspiratory Flow (InspFlow): 10-75 L/min in Volume and Pressure Control, 10-85 L/min in Pressure Support
  • Pressure Support Level (ΔPPS): PEEP + 3 to 20 cmH2O
  • Min. Frequency for Apnea-Ventilation (Freq. Min.): 3-20 bpm and “OFF”
  • Trigger: 2-15 L/min
  • Range of Fresh Gas Flow Indicators: 0.00 to 12.0 L/min
  • Total Fresh Gas Flow Meter: 0 to 10 L/min, calibrated with a mixture of 50 % O2 and 50 % N2O mixture
  • O2 Flush: at 87 psi (6 bar): max.75 L/min, at 41 psi (2.8 bar): min 25 L/min
  • Vaporizer Mount: Dräger or SelectatecR mount
  • Serial Interface: 1 x RS 232 (standard), 1 x RS 232 (option)
  • Protocols: Vitalink and Medibus
  • Data Available for Export: All fresh gas flow, ventilation and O2 data
  • Volume of CO2 Absorber: 1.5 Liter, option: Dräger medical’s consumable CLIC adsorber
  • Volume of Entire compact Breathing System: 2.8 Liter + bag