Medfusion 2010i Syringe Pump

Specifications

• Flow rate: 0.01-378.0 ml/hr dependent upon syringe size
• Bolus rate: up to 378.0 ml/hr dependent upon syringe size
• Total Volume Delivered: 0.0000-9999 mg. ml or units
• Accuracy: ±3%
• Infusion Modes: Body Weight, Mass, Continuous and Volume/time
• Accepts B-D, Monoject and Terumo syringes
• Accepts: B-D 1 TB, 1, 3, 5, 10, 20, 30, 60 ml Luer lock
• Monoject 1 TB, 3, 6, 12, 20, 35, 60 ml Luer lock
• Terumo 1 TB, 3, 5, 10, 20, 30, 60 ml Luer lock
• B-D (glass) 1, 3, 5, 10 ml
• Automatically adjusts the output PSI for different syringe sizes
• Automatically sense syringe size, syringe barrel placement and syringe plunger placement
• All syringes will fill to their maximum
• Power: AC-internal battery
• Recharge Time: No longer than 16 hours with the pump turned off
• Battery Capacity: at 25C a 16 hour charge will operate the pump for approximately 10 hours at 5.0 ml/hr with a 60 ml syringe
• At 25 degrees C a 16 hour charge will pump approx. 10 hrs at 5.0 ml/hr with a 60 ml syringe
• Alarms: Near Empty, Empty, Occlusion, System Malfunction, Low/Depleted Battery, Load Syringe Plunger, Check Clutch, Syringe Pops Out, Invalid Size, Invalid Number, Alarm Audio Volume, soft/loud, Alarm Temporary Delay
• Status Alerts: Stop/Program, Deliver, Battery In Use, Battery Charging, Priming, Back Light, Standby Mode, Bolus Delivery, End of Bolus
• Water resistant case
• Suitable for arterial infusions
• Weight: 2.5 lbs.
• 4.5″ (w) × 3″ (h) × 7.5″ (w)